Capacity and loads
For selecting the correct unit the following data must be known:
- the load (weight force F)
- the bending moments due to off-set load
- the required acceleration
- the required speed of drive
The load values of this chart must n o t be exceeded – n o t e v e for a short period.
| ELZ-drive unit | Unit | 25 | 32 | 40 | 50 | 63 |
| Max. load F | [N] | 80 | 300 | 550 | - - | 1000 |
| Max. Mx | [Nm] | 15 | 30 | 60 | - - | 200 |
| Max. Ms | [Nm] | 1,5 | 3 | 6 | - - | 12 |
| Max. Mv | [Nm] | 3 | 4,5 | 8 | - - | 24 |
| Max. acceleration/delay | [m/s²] | 10 | ||||
| Max. starting rotation speed | [n/min] | 2660 | 2570 | 2420 | - - | 3000 |
| Max. allowed speed | [m/s] | 2 | 3 | 4 | - - | 6 |
Supporting length diagram
The diagram shows at which load and supporting length supports must be mounted.
The additional supporting point is shown where the horizontal line meets the curved line.
All necessary supports can be found in MEDAN accessory range.